Send Message
No.668, Fengting Avenue, Suzhou Industrial Park, Jiangsu Province, China
Home ProductsCleanroom Sticky Mat

Blue White Disposable PE Cleanroom Sticky Mat 30 layers High Tackiness 18" x 36"

Blue White Disposable PE Cleanroom Sticky Mat 30 layers High Tackiness 18" x 36"

Blue White Disposable PE Cleanroom Sticky Mat 30 layers High Tackiness 18" x 36"
Blue White Disposable PE Cleanroom Sticky Mat 30 layers High Tackiness 18" x 36"
Product Details:
Place of Origin: China
Brand Name: allesd
Certification: ISO/SGS/CTI
Model Number: SM0102
Payment & Shipping Terms:
Minimum Order Quantity: Negotiable
Price: Negotiable
Packaging Details: 8 Mats/case; 10 Mats/case
Delivery Time: 10-15days
Payment Terms: T/T
Supply Ability: ~200,000 mats per month
Contact Now
Detailed Product Description
Material: PE Color: Blue/White
Thickness: 28/30/32/35/40/45 Mic Layer: 30 Layer
Popular Sizes: 18" X 36" Name: Cleanroom Sticky Mat
High Light:

sticky walk off mats


sticky dust mats

Blue White Disposable PE Cleanroom Sticky Mat 30 layers High Tackiness 18" x 36"


Clean room mats also known as sticky mats, that help pickup impurities for door entrances that require dust and dirt control.
Our clean room sticky mats feature a tacky surface which removes dirt and dust from shoe or cart castor before they enter. 

Sticky mat can vary in sizes, colors, placement, and numbers based on the characteristics and logistics of each cleanroom.


Matting should be placed in an area where it is clean and flat. It should be placed just before or just after the ingress/ egress point for each cleanliness or control change. It is suggested that the placement sites are worked backward from the final clean area or cleanroom.


The proper size mat depend on the width of the opening and direction and variance of the traffic.

Normally the width of mat should be 2/3rds to 3/4ths of the width of the doorway.

It does not normally need to cover the full width as usually approaching from the straight direction, passes through middle of the doorway.

However, if the traffic enters from the side of the entry or at a sharp angle, then the width of the mat needs to be wider so as to allow for enough footstep. 


The color of sticky mats can vary from standard blue, white, grey or transparent. The color will not effect on the function of the mat. In general, the blue color is preferred by most electronics industry to make sure the layers are changed at frequent intervals. However, white and grey is also popular for hospital or pharmaceutical industry. 

1. Before placing a new mat or replacing an existing mat, thoroughly clean the floor surface and remove contamination that may act as a barrier and keep the mat from adhering.
If you are replacing an existing mat make sure to remove any adhesive residue. We recommend using a pre-saturated wiper that contains a percentage of isopropyl alcohol. Make sure the surface is completely dry before application.
2. To apply the mat, remove half of the release layer in the long direction of the mat. This will help with the alignment of the mat.
3. Start smoothing out at one end and work toward the middle making sure you do not trap air under the mat as you go, then remove the rest of the release layer


Mats should be stored flat. Also it should be used in a controlled temperature of 12-35 C environment for ideal results

Long-term storage of mat should always be on a hard, flat, and solid surface. Storage on the original shipping pallet is recommended.

Normal warehouse conditions are acceptable but extreme temperatures (less than 0 or greater than 40 C) should be avoided.

Storage of product in excess of one year is not recommended. However, under normal storage conditions, product will not have any variation in performance for a period of up to three years.


Widely used in entrance of clean rooms, food manufacturing, labs, electronics etc. 


Spec Value
Size  18" X 36", 24" X 36", 18" X 45", 26" X 45"
Color Blue, White, Grey, Transparent, Green
Tackiness Middle/High
Thickness 28/30/32/35/40/45 micron
Layer 30 or 60 layers
Vertical Stretching Strength(N)
> 20
Lateral Stretching Strength(N)
> 12
Vertical Fracture Elongation Rate(%)
> 200
Lateral Fracture Elongation Rate(%)
> 300
Anti-Aging Performance
240 H
Temperature Stability
Package 4 Mats/case; 8 Mats/case; 10 Mats/case


About Us


Established in 2011, Suzhou Quanjuda Purification Technology Co., LTD is a leading manufacturer and exporter of various ESD & Cleanroom products, offers a full line of ESD & Cleanroom equipment and supplies, providing comprehensive services by manufacturing, sourcing and exporting products from China.


Other Products we Supply


  • Cleanroom Apparels(Disposable, Launderable)
  • Cleanroom Cleaning Supplies(Wipes, Tacky Rollers, Mops, Brushes, Swabs),
  • Cleanroom &ESD Chairs/Stools,
  • Cleanroom Documentation(Paper, Pen, Notebook),
  • Cleanroom Gloves(Finger Cots, PU Coated Glove, PVC Dotted Glove)
  • Cleanroom Mats(Sticky Mat, Table/Floor Mat, Anti-fatigue Mat),
  • ESD Package Materials(Bags, Tapes etc),
  • ESD Storage Materials (Bins, Trays, Circulation Box, Solvent Dispensers),
  • ESD Wrist/Heel Straps/Grounding Cords.
  • Static Control Ionizing Blower/Gun/Nozzle,
  • Illuminated Magnifier,
  • Cleanroom Curtain and etc

More photos

Blue White Disposable PE Cleanroom Sticky Mat 30 layers High Tackiness 18" x 36" 0

Blue White Disposable PE Cleanroom Sticky Mat 30 layers High Tackiness 18" x 36" 1

Contact Details
Suzhou Quanjuda Purification Technology Co., LTD

Contact Person: Leo

Tel: +86-15050190746

Fax: 86-512-66190772

Send your inquiry directly to us (0 / 3000)

Other Products